Nanoplant Start+

Nanoplant Start+

Advantages:
• Accelerates and stabilizes seed germination and plant emergence
• Promotes root system growth and root hair development
• A larger root system promotes better water uptake
• Increases the uptake and use of other nutrients from the soil
• Increases the tolerance of young plants to unfavorable environmental conditions and abiotic stresses
• Can be mixed with insecticides and fungicides for seed treatment
• Suitable for seed with reduced power of germination
• Safe for germinating plants and sensitive seedlings
• Certified for organic farming

Stable composition of high quality nano size mineral elements, in liquid form. The formulation is the effect of many years of searching and testing. Ions of nanonutrients are encapsulated by organic polymer (polysaccharide origin). It provides plants with metal ions necessary for the correct germination, root system building, plant emergence, root system activity and early stages of growth and development.
Packaging: 1 l, 6 l, 20 l.

Cobalt (Co) 0,5 g/l
Iron (Fe) 5,0 g/l
Molybdenum (Mo) 0,5 g/l

Nanoplant Start + is a specialized mineral fertilizer containing nano nutrients that, when applied to seeds during seed preparation, are easily accessible to the emerging root system during germination and the initial development of plants.

Nanoplant Start+ is recommended for seeds of: cereals, pulses, potatoes, oilseed rape, maize, sugar beets and vegetables.

Usage rate:
– 500 ml/t seeds of cereals, maize, oilseed rape etc.
– 800 ml/t of potatoes seed etc.
diluted in 10 l of water.

Nanoplant Profi is compatible with all plant protection products and fertilizers. However, it is advisable to carry out a compatibility test or consult the producer before preparing the working solution.

The working solution should be used within 24 hours.

 

SAFETY DATA SHEET

 

 

Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING

1.1.PRODUCT IDENTIFIER

Product name: Micronutrient fertilizers Nanoplant Start+

1.2.RELEVANT IDENTIFIED USES OF THE SUBSTANCE OR MIXTURE AND USES ADVISED AGAINST

Relevant identified uses: For agricultural use.

Uses advised against: None.

1.3. DETAILS OF THE SUPPLIER OF THE SAFETY DATA SHEET

Manufacturer/Supplier:

ECO – Vlit, JSC

Mindaugo g. 14-22, LT-21113 Trakai, Lithuania

 

Electronic mail address of the person, responsible for the safety data sheet:

info@nanoplant.lt  

1.4. EMERGENCY TELEPHONE NUMBER:

Poison Control Centre (Austria)

Tel. No.: +43 1 406 4343

 

Antigif Centrum Centre Antipoisons (Belgium)

Tel. No.: +32 070 245 045

 

National Toxicology Center, Hospital for Active Medical Treatment and Emergency Medicine “N.I.Pirogov” (Bulgaria)

Tel. No. / fax.: +359 2 9154 233

 

Poison Control Centre (Croatia)

Tel. No.: +385 1 234 8342

 

Toxicological Information Centre (Czech Republic)

Tel. No.: +420 224 919 293 / +420 224 915 402

 

Poison Control Hotline (Denmark)

Tel. No.: +45 82 12 12 12

 

Poisoning Information Centre (Estonia)

Tel. No.: +372 626 93 90

 

Poison Information Centre (Finland)

Tel. No.: +358 09 471 977

 

ORFILA (INERIS) (France)

Tel. No.: + 33 (0) 1 45 42 59 59

 

Health Toxicological Information Service (Hungary)

Tel. No.: +36 80 20 11 99

 

Poison Centre (Iceland)

Tel. No.: +354 543 2222

 

National Poisons Information Centre (Ireland)

Tel. No.: + 353 (0)1 809 2566 / + 353 (0)1 837 9964

 

Valsts Toksikoloģijas centrs, Saindēšanās un zāļu informācijas centrs (Latvia)

Tel. No.: +371 670 42473

 

Health Emergency Situations Centre of the Ministry of Health, Poison Information Bureau (Lithuania)

Tel. No.: +370 5 236 20 52, mob.: +370 687 53378

 

Mater Dei Hospital (Malta)

Tel. No.: +356 2545 0000

 

National Poisons Information Centre (NVIC) (Netherlands)

Tel. No.: +31 (0) 30 274 8888

 

Mental Health Helpline (Norway)

Tel. No.: +47 22 59 13 00

 

Instituto Nacional de Emergência Médica (Portugal)

Tel. No.: + 351 213 303 271

 

Biroul RSI si Informare Toxicologica (Romania)

Tel. No.: +40 021 318 3606

 

National Toxicological Information Centre (NTIC) (Slovakia)

Tel. No.: +421 2 5477 4166

 

Toxicology Information Service (Spain)

Tel. No.: + 34 91 562 04 20

 

Swedish Poisons Information Centre (Sweden)

Tel. No.: +46 08 331231

 

Health and Safety Executive (HSE) (United Kingdom)

Tel. No.: +44 0151 922 9235

 

 

Section 2. HAZARDS IDENTIFICATION

2.1. CLASSIFICATION OF THE SUBSTANCE OR MIXTURE

2.1.1. Classification according to Regulation (EC) No.: 1272/2008 [CLP]

 

Skin Sens. 1; H317.

 

2.1.2. Additional information:

For full text of Hazard- and EU Hazard-statements: see section 16.

2.2. LABEL ELEMENTS

Label according to Regulation (EC) No.: 1272/2008 [CLP]

Hazard pictograms

Signal word:

Warning.

 

Hazard statements:

H317 May cause an allergic skin reaction.

 

Precautionary statements:

P102 Keep out of reach of children.

P280 Wear protective gloves / protective clothing / eye protection / face protection.

P302+P352 IF ON SKIN: Wash with plenty of soap and water.

P333+P313 If skin irritation or rash occurs: Get medical advice/attention.

P501 Dispose of contents/container in accordance with local/national regulations.

 

Supplemental Hazard information (EU):none.

2.3. OTHER HAZARDS

Product does not meet the criteria for vPvB according to Regulation (EC) No. 1907/2006.

 

 

Section 3. COMPOSITION/INFORMATION ON INGRIDIENTS

 

3.1. SUBSTANCES

The product is a mixture of chemical substances.

 

3.2 MIXTURES

Hazardous chemicals:

Identification nameCAS No.EC No.Classification:  According EC No. 1272/2008Weight % content (or range)
Diiron trioxide1309-37-1215-168-2Not Classified.<0,72%
Cobalt diiron tetraoxide12052-28-7234-992-3Skin Irrit. 2; H315

Skin Sens. 1; H317

Eye Irrit. 2; H319

STOT SE 3; H335 (Lungs)

<0,21%
 

Molybdenum dioxide

 

18868-43-4242-637-9Not Classified.<0,07%

Additional information:The full text of H-statements: see Section 16.

 

 

Section 4. FIRST AID MEASURES

4.1. DESCRIPTION OF FIRST AID MEASURES

General information. Get medical attention if any discomfort develops.

Following inhalation.Move to fresh air. Get medical attention if symptoms occur.

Following eye contact.Immediately flush with plenty of water for up to 15 minutes. Remove any contact lenses and open eyes wide apart. Get medical attention if irritation develops or persists.

Following skin contact.Rinse skin with soap and water. Get medical attention if any symptoms occur.

Following ingestion. Rinse mouth immediately and drink plenty of water. Get medical attention if any symptoms occur.

Self-protection of the first aider.Take care of your safety!

 

4.2. MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED

Symptoms: skin redness, exanthema.

 

4.3. INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDED

Treat symptomatically. Treatment of overexposure should be directed at the control of symptoms and the clinical conditions. In case an intoxication is suspected, National Poisons Information Centre should be addressed immediately.

 

 

Section 5. FIREFIGHTING MEASURES

 

General fire hazards. Non-flammable water based mixture. Remove all unauthorized persons from the fire swept area.

 

5.1. EXTINGUISHING MEDIA

Suitable extinguishing media.The product is not combustible. Choose extinguishing media suitable for surrounding fire. Water spray, foam, dry chemical powder or CO2.

Unsuitable extinguishing media.Strong water current. Do not extinguish foam and water on the same surface at the same time as the water destroys the foam.

 

5.2. SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE

Hazardous combustion products.Thermal decomposition may produce toxic smoke, oxides of carbon, metals (micronutrients) oxides and compounds whose composition have not been characterised.

 

5.3. ADVICE FOR FIREFIGHTERS

Special protective equipment for firefighters. Self-contained breathing apparatus and protective clothing.

Special firefighting procedures.Move containers from fire area if you can do it without risk. Use water spray to cool unopened containers. Cool containers with flooding quantities of water until well after fire is out.

 

 

Section 6. ACCIDENTAL RELEASE MEASURES

 

6.1. PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES

For non-emergency personnel. Stay upwind. Eliminate all ignition sources (no smoking, flares, sparks or flames in immediate area). Avoid contact with eyes and skin. Wear suitable protective clothing, gloves and eye/face protection. For personal protection, see Sections 7 and 8.

For emergency responders. Keep unnecessary personnel away. Avoid contact with skin and eyes. If the dust concentration in workplace air exceeds the occupational exposure limit values, approved and suitable respiratory protection must be used. Use personal protection recommended in Section 8 of the SDS.

 

6.2. ENVIRONMENTAL PRECAUTIONS

The product is not classified as dangerous to the environment. Prevent contamination of soil and water. Prevent further leakage or spillage if safe to do so. Contact local authorities in case of spillage to drain/aquatic environment.

 

6.3. METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP

For containment.Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible.

For cleaning up.Mixture spills shovel into sealed containers and return to the manufacturer / supplier. In case of small spills: scoop up residues, pour into a dedicated container and arranged by the SDS Section 13 instructions. The residues washed with water.

Other information.Not available.

 

6.4. REFERENCE TO OTHER SECTIONS

For personal protection, see Section 8. For waste disposal, see section 13.

 

 

Section 7. HANDLING AND STORAGE

 

7.1. PRECAUTIONS FOR SAFE HANDLING.

Advice on safe handling. Keep container tightly closed and in a well-ventilated place. Carry out filling operations only at stations with exhaust ventilation facilities. Avoid generation of dust. Do not breathe dust. If the dust concentration in workplace air exceeds the occupational exposure limit values, approved and suitable respiratory protection must be used. When using do not eat or drink. Do not smoke. Wash hands before breaks and after work. Follow the recommendations in Section 8.

Advice on protection against fire and explosion.Keep away from heat and sources of ignition.

 

7.2. CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES

Keep container tightly closed in a dry and well-ventilated place. Do not store in direct sunlight. Do not store with oxidizing, reducing agents, acids.

 

7.3. SPECIFIC END USE(S)

None. Follow all local regulations for facilities management and safe use. Keep container closed when not in use.

 

 

Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

 

8.1. CONTROL PARAMETERS

Occupational exposure limits. No exposure limits noted for the ingredient(s).

Biological limit values. No biological exposure limits noted for the ingredient(s).

 

Recommended monitoring procedures. Follow standard monitoring procedures.

 

8.2. EXPOSURE CONTROLS

General information:General industrial hygiene practice. Do not eat, drink, smoke at the workplace. Wash hands before breaks and after work.

Appropriate engineering controls.

Provide adequate general ventilation.

 

INDIVIDUAL PROTECTION MEASURES, SUCH AS PERSONAL PROTECTIVE EQUIPMENT

General information. Use personal protective equipment as required. Keep working clothes separately. Personal protective equipment should be chosen according to the CEN standards and in discussion with the supplier of the personal protective equipment.

Eye/face protection.If a splashes hazard, wear goggles with side protection according to the CEN standards (EN 166).

Skin protection:

Hand protection.The quality of the protective gloves the CEN standards (EN 374). See information supplied by the manufacturer.

Other skin protection.Wear suitable protective clothing.

Respiratory protection.No respirator is normally needed. Respiratory equipment is recommended if aerosol or mist is formed (EN 149).

Thermal hazards.Not aplicable.

Hygiene measures. Handle in accordance with good industrial hygiene and safety practices. When using, do not eat, drink, or smoke. Wash hands before breaks and after work. Private clothes and working clothes should be kept separately. Handle in accordance with good industrial hygiene and safety practices.

 

8.2.3. Environmental exposure controls

Contain spills and prevent releases, and observe national regulations on emissions.

 

 

Section 9. PHYSICAL AND CHEMICAL PROPERTIES

 

9.1. INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES

 

APPEARANCE:                                                                liquid (aqueous colloid)

COLOUR:                                                                         dark braun

ODOUR:                                                                           odourless

ODOUR THRESHOLD:                                                    not applicable

pH:                                                                                     6.0-8.5

MELTING POINT/FREEZING POINT:                               0 oC

INITIAL BOILING POINT AND BOILING RANGE:            100 oC

FLASH POINT:                                                                   not applicable

EVAPORATION RATE:                                                       1 g/24h (1 dm2/ 20 oC)

FLAMMABILITY (SOLID, GAS):                                          not flammable

UPPER/LOWER FLAMMABILITY OR EXPLOSIVE

LIMITS:                                                                                 not flammable, not explosive

VAPOUR PRESSURE:                                                         2.3 kPa (17.5 mm Hg, 20oC)

VAPOUR DENSITY:                                                              17.3 g/m3(20 oC)

RELATIVE DENSITY:                                                            ~1 g/cm3

SOLUBILITY:                                                                         aqueous colloidal solution

PARTITION COEFFICIENT (N-OCTANOL/WATER):            no data available

AUTO-IGNITION TEMPERATURE:                                       not applicable

DECOMPOSITION TEMPERATURE:                                    no data available

VISCOSITY:                                                                            1.0 (s/m2)x10-3(20 oC, dynamic)

1.0 (m2/s)x10-6(20 oC, kinematic)

EXPLOSIVE PROPERTIES:                                                   not explosive

OXIDISING PROPERTIES:                                                    not applicable

 

9.2. OTHER INFORMATION

No additional information.

 

 

Section 10. STABILITY AND REACTIVITY

 

10.1. REACTIVITY

The product is non-reactive under normal conditions of use, storage and transport.

 

10.2. CHEMICAL STABILITY

Stable at normal conditions.

 

10.3. POSSIBILITY OF HAZARDOUS REACTIONS

None.

 

10.4. CONDITIONS TO AVOID

Avoid high and low temperatures.

 

10.5. INCOMPATIBLE MATERIALS

Strong acids. Strong alkalis. Strong oxidising agents.

 

10.6. HAZARDOUS DECOMPOSITION PRODUCTS

None.

 

 

Section 11. TOXICOLOGICAL INFORMATION

 

11.1. INFORMATION ON TOXICOLOGICAL EFFECTS

Acute toxicity:

Diiron trioxide; CAS Nr. 1309-37-1:

Acute Oral Toxicity (mouse): LD0 – >750 mg/kg;

Acute Inhalation Toxicity (rat): LC50 – 20 mg/m3/2h (aerosol) (air).

 

Molybdenum dioxide; CAS Nr. 18868-43-4:

Acute Oral Toxicity (rat): LD50 – >5000 mg/kg;

Acute Inhalation Toxicity (rat): LC50 – >1.93 mg/l/4h (dust) (air);

Acute Dermal Toxicity (rat): LD50 – >2000 mg/kg.

 

Skin corrosion/irritation.No data available.

Serious eye damage/eye irritation.No data available.

Respiratory or skin sensitisation.May cause skin sensitisation.

Germ cell mutagenicity. None.

Carcinogenicity. Not expected carcinogenicity.

Reproductive toxicity. None.

STOT – single exposure. May cause irritant respiratory system (Lungs).

STOT – repeated exposure. No data available.

Aspiration hazard.Not applicable.

 

Other information. May cause skin sensitisation.

 

 

Section 12: ECOLOGICAL INFORMATION

 

12.1. TOXICITY

 

Diiron trioxide; CAS Nr. 1309-37-1:

Fish: LC50 – 20 mg/l/96h (Lepomis macrochirus);

Invertebrates: LC50 – 51 mg/l/96h (Cerax destructor);

Algae: NOEC – 1.4 mg/l/7d.

 

Molybdenum dioxide; CAS Nr. 18868-43-4:

Fish: LC50 – 20 mg/l/96h (Oncorhynchus mykiss);

Invertebrates: LC50 – >1 mg/l/7d. (Hyalella azteca);

Algae: EC10 – 52.4 mg/l/72h (Pseudokirchnerella subcapitata).

 

12.2. PERSISTENCE AND DEGRADABILITY

Contains component/components that biodegrade with difficulty.

 

12.3. BIOACCUMULATIVE POTENTIAL

No data available.

 

12.4. MOBILITY IN SOIL

No data available.

 

12.5. RESULTS OF PBT AND vPvB ASSESSMENT

The mixture does not meet the criteria for a classification as PBT or vPvB.

 

12.6. OTHER ADVERSE EFFECTS

No data available.

 

 

Section 13. DISPOSAL CONSIDERATIONS

 

13.1. WASTE TREATMENT METHODS

The producer of the waste must dispose the product according to its use, specific to the industry and the process, in cooperation with the local waste management company based on local waste disposal regulations and national regulations and laws.

Contaminated packaging should be disposed according to local and national regulations and in consultation with the local waste management companies.

For Europe, the waste producer sets the waste code in accordance with the European Waste List (Decision 2000/532/EC).

 

 

Section 14. TRANSPORT INFORMATION

 

Transport only in accordance with ADR for road haulage, RID for rail transportation, ADNR/IMDG for carriage by vessel/sea and IATA for carriage by air.

 

14.1. UN number.  None

14.2. UN proper shipping name. None

14.3. Transport hazard class(es). None

14.4. Packing group. None

14.5. Environmental hazards. No

14.6. Special precautions for user. Read safety instructions, SDS and emergency procedures before handling.

14.7. Transport in bulk according to

Annex II of MARPOL 73/8 and the IBC Code. Not applicable. However, this product is a liquid and if transported in bulk covered under MARPOL 73/78, Annex I.

 

 

Section 15. REGULATORY INFORMATION

 

15.1. SAFETY, HEALTH AND ENVIRONMENTAL REGULATIONS/LEGISLATION SPECIFIC FOR THE SUBSTANCE OR MIXTURE

  • Regulation (EC) No. 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No.793/93, Commission Regulation (EC) No. 1488/94, Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC (Official Journal of the European Union No. L 396, 30-12-2006, error correction – No. L 136/3, 2007-5-29);
  • On 16 December, 2008 the Regulation (EC) No. 1272/2008 of the European Parliament and of the Council on classification, labelling and packaging of chemical substances and mixtures was undersigned. The said Regulation amended and repealed the directives 67/548/EEC and 1999/45/EC and Regulation (EC) No. 1907/2006 (the REACH Regulation). The Regulation has been published in the Official Journal of the European Union No. L353, volume 51 on 31 December, 2008;
  • The European Agreement concerning International Carriage of Dangerous Goods by Road (ADR).

 

15.2. CHEMICAL SAFETY ASSESSMENT

Not applicable according to Regulation (EC) 1907/2006 (REACH) Article 37 (4).

 

 

Section 16. OTHER INFORMATION

 

16.1. INDICATION OF CHANGES

Information contained in the Regulation 1907/2006/EC with the Regulation 830/2015.

Indication of changes:–.

Date of filling: 25-05-2016

Revision: –

Version No.: 1

 

16.2. Full text of Hazard and Precautionary statements

 

H315 Causes skin irritation.

H317 May cause an allergic skin reaction.

H319 Causes serious eye irritation.

H335 May cause respiratory irritation.

 

P102 Keep out of reach of children.

P280 Wear protective gloves / protective clothing / eye protection / face protection.

P302+P352 IF ON SKIN: Wash with plenty of soap and water.

P333+P313 If skin irritation or rash occurs: Get medical advice/attention.

P501 Dispose of contents/container in accordance with local/national regulations.

 

Supplemental Hazard information (EU):none.

 

 

Abbreviations:

Skin Irrit. 2 – Skin corrosion/irritation, Hazard Category 2.

Skin Sens. 1 – Skin sensitisation, Hazard Category 1.

Eye Irrit. 2 – Serious eye damage/eye irritation, Hazard Category 2.

STOT SE 3 – Specific target organ toxicity – Single exposure, Hazard Category 3. (Lungs).

 

Acronyms:

ADR – European Agreement concerning the International Carriage of Dangerous Goods by Road.

ADN – European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways.

RID – Regulations concerning the International Carriage of Dangerous Goods by Rail.

IMDG – International Maritime Dangerous Goods.

IATA – International Air Transport Association.

IMO – International Maritime Organization.

vPvB – Very Persistent and Very Bioaccumulative.

PBT – Persistent, Bioaccumulative and Toxic substance.

LC50 – Lethal Concentration to 50 % of a test population.

LD50 – Lethal Dose to 50% of a test population (Median Lethal Dose).

CAS – Chemical Abstracts Service number.

CEN – European Committee for Standardisation.

STOT – Specific Target Organ Toxicity.

PNEC(s) – Predicted No Effect Concentration(s).

MSDS – Material Safety Data Sheet.

 

KEY LITERATURE REFERENCES AND SOURCES FOR DATA:

The data provided by the European Chemicals Bureau (ECB), European Chemicals Agency (ECHA), Swedish Chemicals Agency (KEMI), International Laboratories Organization (ILO), the TOXNET Internet pages.

 

Disclaimer:

Information is correct to the best of our knowledge at the date of the MSDS publication. It is not a specification sheet nor should any displayed data be construed as a specification. The information on this MSDS was obtained from sources which we believe are reliable. However, the information is provide without any warranty, expressed or implied, regarding its correctness. Some information presented and conclusions drawn herein are from sources other than direct test data on the mixture itself. The conditions or methods of handling, storage, use and disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage, or expense arising out of or in any way connected with handling, storage, use, or disposal of this product. If the product is use as a component in another product, this MSDS information may not be applicable.

Contacts us

Let's talk